Canadian Journal of Chemical Engineering

View more issues:

Articles in August, 2008 issue of Canadian Journal of Chemical Engineering

• Flow rate measurement errors in vacuum tubes: effect of gas resistance to accumulation
  by R. Chapanian
• Ultrasound-facilitated electro-oxidation for treating cyan ink effluent
  by Chee-Yong Chua
• Direct oxidation of hydrogen sulphide to sulphur using impregnated activated carbon catalysts
  by Ajay K. Dalai
• Carbon dioxide mass transfer to non-linear alkanes
  by D. Gomez-Diaz
• Fault diagnosis and fault tolerant control using reduced order models
  by Seema Manuja
• Determination of minimum speed required for solids suspension in stirred vessels using pressure measurements
  by Y.S. Selima
• Observations and analysis of electrokinetically driven particle trapping in planar microelectrode arrays
  by Matthew R. Tomkins
• A genetic-algorithm-based optimal scheduling system for full-filled tanks in the processing of starting materials for alumina production
  by Chunhua Yang
• Pressure drop and mixing behaviour of non-Newtonian fluids in a static mixing unit
  by Gunjan Kumar
• Horizontal air—water flow in a square cross-section channel: pseudo-slug flow regime
  by A.M. Ribeiro
• Laminar, transitional and turbulent flow of Herschel—Bulkley fluids in concentric annulus
  by K. Founargiotakis
• Experimental and numerical study of heat transfer in horizontal concentric annulus containing phase change material
  by Ritabrata Dutta
• On the drift-flux analysis of flotation and foam fractionation processes
  by Paul Stevenson
• Mechanisms of solids drawdown in stirred tanks
  by Oscar Khazam
• Auto-thermal combustion of lean gaseous fuels utilizing a recuperative annular double-layer catalytic converter
  by Wojciech M. Budzianowski
• Lattice-Boltzmann simulation of sago starch solutions in porous media
  by Luis Velazquez-Ortega
• Operation of an industrial steam reformer under severe condition: a simulation study
  by J. Shayegan
• The reaction of NiO/Ni[Al.sub.2][O.sub.4] particles with alternating methane and oxygen
  by Tobias Mattisson
• Binary coalescence of air bubbles in viscous liquids in presence of non-ionic surfactant
  by K. Giribabu
• Mathematical modelling of an industrial furnace for high-temperature heat treatment of wood
  by Afet Aysegul Osma
• Modelling spatial distributions of moisture and quality during drying of granular baker's yeast
  by Ugur Yuzgec