Canadian Journal of Chemical Engineering

View more issues:

Articles in Dec, 2008 issue of Canadian Journal of Chemical Engineering

• Effect of shaft eccentricity on the laminar mixing performance of a radial impeller
  by F. Cabaret; Fradette L.; P.A. Tanguy
• Synthesis of heterogeneous copper complex catalyst for oxidation of cyclohexane using molecular oxygen
  by K.S. Anisia; A. Kumar
• Morphology and deactivation behaviour of Co-Ru/[gamma] [AL.sub.2][O.sub.3] Fischer-Tropsch synthesis catalyst
  by Ahmad Tavasoli; Mohammad Irani; Reza M. Malek Abbaslou; Mariane Trepanier; Ajay K. Dalai
• Mathematical modelling of C[O.sub.2] facilitated transport through liquid membranes containing amines as carrier
  by Aliakbar Heydari Gorji; Tahereh Kaghazchi
• Oil-water two-phase flow in microchannels: flow patterns and pressure drop measurements
  by Abdelkader Salim; Mostafa Fourar; Jacques Pironon; Judith Sausse
• Properties of uniaxially stretched polypropylene films
  by Farhad Sadeghi; Pierre J. Carreau
• Notes on the issues of equilibrium in the Fischer-Tropsch synthesis
  by Graeme W. Norval
• Henry's law constant for hydrogen in high temperature water with dissolved lithium and boron
  by Franck Giraudeau; Derek H. Lister; David R. Morris; Uncharat Setthanan; Frank R. Steward; Lei Tai Yang
• Flow regime determination in horizontal hydrotransport using non-intrusive acoustic probes
  by Katherine Albion; Lauren Briens; Cedric Briens; Franco Berruti
• A particle filter approach to identification of nonlinear processes under missing observations
  by R.B. Gopaluni
• Optimization by response surface methodology for toluene adsorption onto prepared acid activated clay
  by Abdelfattah Amari; Abdelaziz Gannouni; Mohamed Chlendi; Ahmed Bellagi
• Catalytic dehydration of lactic acid to acrylic acid over sulfate catalysts
  by Jinfeng Zhang; Jianping Lin; Peilin Cen
• Measurement of sliding velocity and induction time of a single micro-bubble under an inclined collector surface
  by Aref Seyyed Najafi; Xhenghe Xu; Jacob Masliyah
• Steam fingering at the edge of a steam chamber in a heavy oil reservoir
  by Dharmesh R. Gotawala; Ian D. Gates
• The influence of distributor structure on the solids distribution and flow development in circulating fluidized beds
  by Aijie Yan; Weixing Huang; Jesse "Jingxu" Zhu