ICE 2006—FutureCoat!

JCT CoatingsTech, Oct, 2006

Ernest C. Galgoci, Khalil Yacoub, Mauricio F. Misdrahi, K. Michael Peck, Wim P. Stout, and Steven Y. Chan, Air Products and Chemicals, Inc.

3:00-3:30 pm -- Novel Acrylic Block Copolymer Pigment Dispersants for Water-based Coatings

Clemens Auschra, Peter Harbers, Frank Pirrung, Manfred Jorna, Lothar Engelbrecht, and Marcel van der Sluis, Ciba Specialty Chemicals

3:30-3:45 pm -- Break

3:45-4:15 pm -- The Development of New SMA[R] Esters as Pigment Dispersants for Waterborne Coatings and Inks

William R. Dougherty, Robert B. Adams, and Disa Grant, Sartomer Company, Inc.; and Lisa Fine, Flexo Tech, Inc.

4:15-4:45 pm -- Use of Novel Polyether-alkanolamine Comb Polymers as Pigment Dispersants for Aqueous Coating and Ink Systems

Duy Nguyen, Huntsman Corporation

4:45-5:15 pm -- Not Your Same Old Polymers; Same Monomers--New Polymers

Bernd Gobelt, BYK Chemie GmbH and John W. Du, BYK-Chemie USA

Corrosion: Protection & Measurement

(2:30 pm-4:45 pm; Rooms 240-241)

2:30-3:00 pm -- Using DC Electrochemical Techniques to Assess the Relative Corrosiveness of Water-Based Coatings and Their Ingredients

F. Louis Floyd, Consultant; Sumeet Tatti and Theodore Provder, Eastern Michigan University (ROON)

3:00-3:30 pm -- Waterborne Silane Conversion Coating for Replacement of Phosphate/Chromate Pretreatments

Shiu-Chin Su, Alexander Borovik, and Kendall Guyer, GE Advanced Materials Silicones

3:30-3:45 pm -- Break

3:45-4:15 pm -- Interpreting and Modeling Corrosion Protection as Measured by Electrochemical Impedance Spectroscopy

Brian Hinderliter, Kerry Allahar, Olga Stafford, and Stuart Croll, North Dakota State University

4:15-4:45 pm -- Formulated Didecyl Dimethyl Ammonium Bicarbonate/Carbonate (DDABC), A Multi-Metal Corrosion Inhibitor with Relevance to Commercial Surface Preparation and Coatings Technologies

Tom Bedard, Lonza Inc.; David Burleigh, New Mexico Tech; and Joe Kimler, Lonza, Inc.

Formulating II: Enhancing Performance

(2:30 pm-5:15 pm; Rooms 252-253)

2:30-3:00 pm -- Novel Tools for Coating Developers: The Solution of the Inverse Problem in Formulation

Eduardo Nahmad-Achar, Javier E. Vitela, and Rene Nakamura, Centro de Investigacion de Polimeros, Grupo COMEX

3:00-3:30 pm -- Strategies for Boosting the Infrared Reflectance of Coatings for "Cool Roof" Applications

Min Zheng and Kurt A. Wood, Arkema Inc.

3:30-3:45 pm -- Break

3:45-4:15 pm -- Novel Techniques to Investigate the Impact of Cellulose Esters on the Rheological Properties and Appearance in Automotive Basecoat Systems

Deepanjan Bhattacharya, Kab Seo, Louis T. Germinario, Mark D. Clark, Kevin McCreight, and Chip Williams, Eastman Chemical Company (ROON)

4:15-4:45 pm -- Formulating Paints for Reduced Viscosity Loss on Tinting

Daniel A. Saucy, Jerome Harris, Carol Zeszotarski, and Barrett Bobsein, Rohm and Haas Co.

4:45-5:15 pm -- Nylon-12 (Polyamide) Fine Powders for Coatings

Wolfgang Christoph, Degussa AG

Friday, November 3

High Throughput: Instrumentation & Methodologies

(9:00 am-11:30 am; Room 242)

9:00-9:30 am -- High-Throughput Combinatorial Characterization of Thermosetting Siloxane-Urethane Coatings Having Spontaneously Formed Microtopographical Surfaces