ICE 2006—FutureCoat!

JCT CoatingsTech, Sept, 2006

Introduced in 2006 is the industry's state-of-the-art technical conference--FutureCoat! This key educational event explores the most innovative methodologies and applications shaping the coatings industry. Presentations by leading industry experts bridge the gap between the latest research and development and the actual implementation that will direct the future of the industry.

Wednesday, November 1

Keynote

(1:00 pm-2:00 pm)

A Tale of Two Perspectives: Hurricanes, Energy, the Consumer and What It Means for Coatings

Duncan H. Meldrum, Chief Economist, Air Products and Chemicals, Inc.

Manufacturing: Productivity & Safety

(2:15 pm-4:30 pm)

2:15-2:45 pm -- A Literature Survey on Wet Adhesion. Part III: Test Methods, Additives, and Applications

Northwestern Society Technical Committee (to be presented by Darryl A. Frick, Conklin Corporation)

2:45-3:15 pm -- Improved Product Development Using Computer Assisted Formulation

Rory Job, BatchMaster Software

3:15-3:30 pm -- Break

3:30-4:00 pm -- A Six Sigma Model for Dispersion of Superdurable Ti[O.sub.2] in Polyester Coil Coatings

Ronald Romer, Lyondell Chemical Co.

4:00-4:30 pm -- Complexity Made Simple: Using A Single Software System for Manufacturing Operations

Jay T. Deakins, Deacom, Inc.

Green Chemistry I: Antimicrobials

(2:15 pm-5:00 pm)

2:15-2:45 pm -- An Evaluation of the Concept of Tethering Triclosan, and Organic Biocide, to a Coating Matrix to Create Novel, Environmentally Friendly, Antifouling Coatings

Bret J. Chisholm, David A. Christianson, Shane J. Stafslien, Nathan Gubbins, and Justin Daniels, North Dakota State University

2:45-3:15 pm -- Role of Mildewcide in Yellow Discoloration of Latex Paints

Lakshmi Sadasivan, Roger C. Montemayor, and Judy N. Varner, Rohm and Haas Company

3:15-3:30 pm -- Break

3:30-4:00 pm -- Antimicrobial Coating: Can It Be Effective Against Bacteria?

Emerentiana Sianawati, Arch Chemicals Inc.

4:00-4:30 pm -- Efficacy Requirements for Microbial Resistant Coatings

Wolfgang Lindner and Gary L. Horacek, Troy Corporation

4:30-5:00 pm -- Review of Biologically Active Surfaces

Niall D'Arcy, BIS, University College Dublin

Pigments/Additives I: Enhancing Performance

(2:15 pm-5:00 pm)

2:15-2:45 pm -- Effects of Alumina and Silica Nanoparticles on Automotive Clearcoat Properties

Bryce Floryancic, Lukas Brickweg, California Polytechnic State University; Jeffrey Comer, California Polytechnic State University and National Institute of Standards and Technology (NIST); Li-Piin Sung and Aaron Forster, NIST; and Ray Fernando, California Polytechnic State University

2:45-3:15 pm -- Wax Emulsions in Paints and Coatings

Martin A. Cohen, Michelman Inc.

3:15-3:30 pm -- Break

3:30-4:00 pm -- The Influence of Alkanolamines on Anchor Type Adhesion of Coatings on Plastics

Michael D. Gernon, Ben Carlozzo, and Daniel Alford, Arkema, Inc.

4:00-4:30 pm -- Enhancing the Performance of Aqueous Low VOC Coatings With a Unique Wetting Additive

Sheila Belding, William Dechent, Syed Kazmi, Dale Lyman, Gerald Marinzulich, Robert Miller, and Pravin Patel, Troy Corporation

4:30-5:00 pm -- New Methods for Matting 100% UV Coatings

Hans-Dieter Christian, Degussa AG

Instrumentation/Analysis I: Morphology

(2:15 pm-5:00 pm)

2:15-2:45 pm -- Adaptive Speckle Imaging Interferometry (A.S.I.I.): New Technology for Advanced Film-Formation Analysis

Alice Brun and L. Brunel, Formulaction, L'Union; and P. Snabre, Centre de Recherche Paul Pascal

2:45-3:15 pm -- Structure, Diffusivity and Rheology of Didecyl Dimethyl Ammonium Bicarbonate/Carbonate (DDABC) in Aqueous Solutions

Henrich H. Paradies, The University of Salford and Joe Kimler, Lonza Inc.

3:15-3:30 pm -- Break

3:30-4:00 pm -- Role of van der Waals Force in Latex Film Formation

Xiaobo Gong, H.T. Davis, and L.E. Scriven, University of Minnesota (ROON)

4:00-4:30 pm -- Correlating Surface Morphology to Damage Response in Polymer Coatings through Instrumented Scratch Testing

Li-Piin Sung, Aaron Forster, Chris Michaels, and Jeffrey Comer, NIST, and Peter L. Drzal, PPG Industries

4:30-5:00 pm -- Modelling the Cure of Powder Coatings: Using the Powder Coatings Absorptivities

I. Bombard, P. Laurent, and J. Lieto, Laboratoire d'Automatique et de Genie des Procedes (LAGEP)

Thursday, November 2

Mattiello Memorial Lecture

(8:00 am-9:15 am)

Making a Linkage between Field and Laboratory Exposure Results via a Reliability-Based Methodology

Jonathan W. Martin, NIST

Nanotechnology

(9:30 am-11:30 am)

9:30-10:00 am -- Shear-Induced Alignment of Alumina Nanoparticles in Coatings

Lukas Brickweg, Bryce Floryancic, and Ray Fernando, California Polytechnic State University

10:00-10:30 am -- Degradation Modes of Polymeric Coatings Exposed to Photolytic, Hydrolytic and Corrosive Environments

Tinh Nguyen, Xiaohong Gu, NIST; Mark Vanlandingham, Army Research Laboratory; Eric Byrd and David Martin, NIST; Rose Ryntz, Visteon Corp. (now with Collins and Aikman); and Jonathan W. Martin, NIST (ROON)

10:30-11:00 am -- Additives for Coatings Containing Nanomaterials for Wear -- Scratch Resistance, and UV Protection

Robert H. McMullin, BYK Chemie USA