Manufacturing Industry

ICE 2007 FutureCoat!

JCT CoatingsTech, Sept, 2007

Track 5

Nanotechnology

(9:15 am-12:00 noon; Rm. 713B)

9:15-9:45 am -- Zinc Oxide Nanoparticle Dispersions as Unique Additives for Coatings -- Charles Hegedus, Frank Pepe, Denise Lindenmuth, Detlef Burgard, Lisa Mercando, and Jennifer Bierkamp, Air Products and Chemicals, Inc.

9:45-10:15 am -- A Novel Method to Covalently Functionalize Carbon Nanotubes with Isocyanate for Polyurethane Nanocomposite Coatings -- Aline Granier, Tinh Nguyen, Kristen L. Steffens, Ha-Jin Lee, Alex Sharpiro, and Jonathan W. Martin, National Institute of Standards and Technology (ROON)

10:15-10:30 am -- Break

10:30-11:00 am -- Combining Long-Term UV Protection and Transparency by Using Nano-Sized Cerium Oxide and Zinc Oxide -- Jeroen van den Bosch and Philip Eyckmans, Umicore Research, Belgium

11:00-11:30 am -- Polymeric Nanocoatings by Initiated Chemical Vapor Deposition -- Hilton G. Pryce Lewis, Karen K. Gleason, Aleksandr J. White, and Neeta P. Bansal, GVD Corporation

11:30 am-12:00 noon -- Investigating the Addition of Hydrophilic and Hydrophobic Nano-Silica Filler on the Morphological and Mechanical Properties of Acrylic-Based Polyurethane Clearcoats -- Hamed Dastmalchian, Siamak Moradian, Mohammad Mahdi Jalili, and Ali Karbasi, Amirkabir University of Technology, Iran

Track 6

Mattiello Symposium -- Corrosion I

(9:15 am-11:00 am; Rm. 713A)

9:15-9:45 am -- Assessing the Role of Magnesium in Magnesium-Rich Coatings -- Rebecca DeRosa, Alfred University

9:45-10:15 am -- Development of Hybrid Organic-Inorganic Binder for Mg-Rich Primer -- Seva Balbyshev, Jun Li, Missy Berry, Gordon P. Bierwagen, and Bret J. Chisholm, North Dakota State University

10:15-10:30 am -- Break

10:30-11:00 am -- Corrosion Protection of Aluminum Substrates by a Mg-Rich Primer Studied by Electrochemical Scanning Techniques -- A.M. Simoes, Instituto Superior Tecnico, Portugal; and D. Battocchi, D.E. Tallman and G.P. Bierwagen, North Dakota State University

Mattiello Memorial Lecture

(1:00 pm-2:15 pm; Rm. 701A-B)

The Physical Chemistry of Organic Coatings Revisited: Viewing Coatings as a Materials Scientist -- Gordon P. Bierwagen, North Dakota State University

Track 1

Green Chemistry -- Renewable Resources II

(2:30 pm-5:15 pm; Rm. 705)

2:30-3:00 pm -- Alternative Fungicide and Bactericide Based on Green Chemistry and Green Engineering -- Karen Winkowski and William Woods, International Specialty Products

3:00-3:30 pm -- Synergistic Combinations of In-Can Preservatives--Green and Effective -- Ioana Annis, Jon Raymond, Mary Chervenak, and Pierre Lenoir, Dow Biocides

3:30-3:45 pm -- Break

3:45-4:15 pm -- Use Level Optimization of Preservatives in Coatings -- Wolfgang Lindner and Gary L. Horacek, Troy Corporation

4:15-4:45 pm -- Coating Vehicles with Green Chemicals -- Jean-Luc Dallons, Cardolite Corporation, Belgium

4:45-5:15 pm -- A Case Study of a Marine Coatings Manufacturer's Odor Compliance and Biological Odor Control Technologies -- Daryl Letto, Derek Webb, Jim Remus, Corrie Schyff, and Bill Mullin, BIOREM Technologies, Canada


 

BNET TalkbackShare your ideas and expertise on this topic

Please add your comment:

  1. You are currently: a Guest |
  2.  

Basic HTML tags that work in comments are: bold (<b></b>), italic (<i></i>), underline (<u></u>), and hyperlink (<a href></a)

advertisement
advertisement
  • Click Here
  • Click Here
  • Click Here
advertisement
Click Here

Content provided in partnership with Thompson Gale