Polymer Engineering and Science

View more issues:

Articles in April, 2009 issue of Polymer Engineering and Science

• Maleic anhydride-grafted linear low-density polyethylene with low gel content
  by Le-Ping Huang
• In memory of Prof. Robert Simha
  by I. Otterness
• Characterization of twin-screw-extruder-compounded polycarbonate nanoclay composites
  by Katja Nevalainen
• Estimation of stresses required for exfoliation of clay particles in polymer nanocomposites
  by Nitin K. Borse
• Potential of ball milling to improve clay dispersion in nanocomposites
  by Florence Perrin-Sarazin
• Preparation and properties of epoxy nanocomposites. I. The effect of premixing on dispersion of organoclay
  by T.-d. Ngo
• Mechanical and thermal properties of functionalized multiwalled carbon nanotubes/cyanate ester composite
  by Jinhe Wang
• Polyurethanes from tung oil: polymer characterization and composites
  by M.A. Mosiewicki
• Mechanical properties of carbon black-filled polypropylene/polystyrene blends containing styrene-butadiene-styrene copolymer
  by Mohammed H. Al-Saleh
• Structure and property of injection-molded polypropylene along the flow direction
  by Xiaofeng Yu
• High-strength composites based on tung oil polyurethane and wood flour: effect of the filler concentration on the mechanical properties
  by U. Casado
• Electrical conductivity and optical properties of poly organic semiconductor
  by Fahrettin Yakuphanoglu
• Role of the interphase in the flow stability of reactive coextruded multilayer polymers
  by Khalid Lamnawar
• Diffusion and morphological properties of syndiotactic polypropylene films
  by Kohtaro Yamashita
• Organoclay-filled caprolactam-blocked methylenediphenyl diisocyanate-toughened epoxy interpenetrating network matrices
  by S. Premkumar
• Thermoplastic toughened layered silicate epoxy ternary nanocomposites—preparation, morphology, and thermomechanical properties
  by A. Asif
• Study of application of ultrasonic wave to injection molding
  by Atsushi Sato
• Application of gentle annular gas veil for electrospinning of polymer solutions and melts
  by D.M. Rein
• Optimization of preform temperature distribution for the stretch-blow molding of PET bottles: infrared heating and blowing modeling
  by M. Bordival
• Weathering properties of elastic rubber concrete comprising waste tire solution
  by Kyung-Ho Chung
• Preparation and characterization of poly/silica nanocomposites
  by Xiayin Yao
• Surface characterization of air plasma treated poly vinylidene fluoride and poly methyl methacrylate films
  by S.M. Pawde
• Solubility of terephthalic acid in the reaction system oligomeric bishydroxybutyl terephthalates—1, 4-butanediol
  by Hainan Huang
• Nylon 66/clay nanocomposite structure development in a twin screw extruder
  by Bin Lin