Bibliography for: "Fracture behavior at partially miscible polymer interfaces"

Russell E. Gorga "Fracture behavior at partially miscible polymer interfaces". Polymer Engineering and Science. FindArticles.com. 04 Jan, 2010. http://findarticles.com/p/articles/mi_hb3367/is_5_44/ai_n29104311/

Polymer Engineering and Science

View more issues:

Articles in May, 2004 issue of Polymer Engineering and Science

• Mechanical response and rheological properties of polycarbonate layered-silicate nanocomposites
  by Alex J. Hsieh
• The study of morphology, thermal and thermo-mechanical properties of compatibilized TPU/SAN blends
  by M. Ulcnik-Krump
• On the use of pressure-volume-temperature data of polyethylene liquids for the determination of their solubility and interaction parameters
  by L. Zhao
• Non-isothermal crystallization kinetics of polyamide 1010/montmorillonite nanocomposite
  by Zengjun Liu
• The design and performance of a new miniature mixer for specialty polymer blends and nanocomposites
  by Orna Breuer
• Effect of filler dispersion on polypropylene morphology
  by T. Lozano
• Ejection force in tubular injection moldings. Part I: effect of processing conditions
  by A.J. Pontes
• Fluorescence temperature measurements: methodology for applications to process monitoring
  by Anthony J. Bur
• Cure characteristics, mechanical properties, and morphological studies of linoleum flour-filled NBR compounds
  by J. Biagiotti
• Optimal process conditions of shrinkage and warpage of thin-wall parts
  by S.J. Liao
• Fracture behavior at partially miscible polymer interfaces
  by Russell E. Gorga
• Semi-interpenetrating polymer networks based on polyurethane and poly obtained by photopolymerization: structure-property relationships and bacterial adhesion
  by L.V. Karabanova
• Interlayer adhesion of coextruded films: effect of biaxial stretching
  by Hongyi Zhou
• Effect of shrinkage and process parameters on the monitoring of bulk and surface stream temperatures in injection molding via the infrared waveguide method
  by A. Bendada
• Thickness uniformity of HDPE blown film: relation to rheological properties and density
  by Hiroyuki Higuchi
• The effect of long chain branching on the processability of polypropylene in thermoforming
  by A.D. Gotsis
• Primary and secondary gas penetration during gas-assisted injection molding. Part I: formulation and modeling
  by C.T. Li
• Primary and secondary gas penetration during gas-assisted injection molding. Part II: simulation and experiment
  by C.T. Li