Molding services and equipment

Medical Product Outsourcing, June, 2008

FloMet LLC

810 Flight Line Boulevard

DeLand, FL 32724

Phone: (888) 891-7775

Fax: (386) 736-6063

Web: www.flomet.com

E-mail: dtasseff@flomet.com

Contact: Dan Tasseff

Comments: Designing with advanced material. Tailoring materials to the task. Powder metallurgy and metal injection technology have been successful at making complex net-shape parts from high-performance alloys. It is similar to injection molding of plastic, and mechanical properties are actually better than those of metal castings. It is possible to replace plastic parts with metal versions that require little or no redesign and minimal-cost impact compared to a machined component.

Fresenius Kabi Product Partnering

Else Kronerstrasse 1

Bad Homburg, Germany

Phone: 49 6172 686 1240

Web: www.freseniuskabi-productpartnering.com

E-mail: product.partnering@fresenius-kabi.com

Contact: Stefan Vogt

Services: Development and engineering of medicine-technical disposables for infusion therapy, enteral therapy and subcutaneous application. Development including O-series prototype manufacture to fully or partially automated mass production. Filling and finishing of 1V bags (large and mini bags), bottles (glass and plastic), vials (glass and plastic), ampoules (glass and plastic), cartridges and customized containers. Aseptic processing, terminal sterilization and lyophilization. Processing of solutions and disperse systems such as emulsions and liposomes. Full analytical, microbiological, pharmaceutical and regulatory assistance. Worldwide shipping. Optimal logistics through a manufacturing presence on all continents.

Comments: We provide our customers integral support throughout the life cycle of their sterile products. Starting at the early stages through to full commercial scale, covering development and filling and finishing, supporting worldwide demands.

Gauthier Biomedical, Inc.

1235 North Dakota Drive

Grafton, WI 53024

Phone: (262) 546-0010

Fax: (262) 546-0011

Web: www.gauthierbiomedical.com

Contact: Dean Poulos

Products and Equipment: Ratcheting screwdriver handles, torque limiting/torque measuring instruments, spinal instruments, silicone handles, Quick Connects, custom orthopedic instruments.

Services: Gauthier Biomedical's silicone handles are manufactured using a state-of-the-art proprietary process, with the ability to overmold onto stainless steel, aluminum and high performance plastic cores. The material used for the silicone handles is a custom blended formulation, allowing for specific hardness and color requirements.

GW Plastics, Inc.

239 Pleasant Street

Bethel, VT 05032

Phone: (802) 234-9941

Fax: (802) 234-9936

Web: www.gwplastics.com

E-mail: Stephanie.Corey@GWPlastics.com

Contact: Stephanie Corey

Services: Precision, close-tolerance molding, multi-shot molding, automated insert molding, liquid silicone robber molding, thin-wall, bio-absorbable materials, temporary and permanent implantables, scientific injection molding, contract design and development services, prototype and production tooling.

Comments: GW Plastics is a global, high-precision injection molder, mold builder and contract manufacturer specializing in single-source responsibility for medium-to-high volume, close-tolerance components and assemblies. Typical applications include diagnostic components, surgical instruments, drug delivery systems, personal care products, filtration components and life sciences applications. USA and low-cost country Class 8 clean room molding and assembly locations available. ISO 9001:2000 registered, FDA registered device manufacturer.