Manufacturing Industry
POLYETHYLENE: ULDPE--UNFILLED.(Illustration)
Plastics Technology, October, 2001
POLYETHYLENE: ULDPE -- UNFILLED
Melt Notched
Flow Tensile Izod
Rate, Str at Elongation Flex Impact,
Density, g/10 Yield, at Yield, Modulus, ft-lb/in.
g/cc min 1000 psi % 10E5 psi (1/8 in.)
BLOW MOLDING AND
EXTRUSION
0.905 0.8 - - - -
0.91 1 5 - - -
Deflection
Density, Temp., F Rockwell Features,
g/cc @ 66 psi Hardness Applications
BLOW MOLDING AND
EXTRUSION
0.905 - - MED,TRP
0.91 - -...
Premium Content Partnership |
HighBeam Research provides an in-depth online archive library of reference works.
Most Recent Business Articles
- Multiple criteria evaluation and optimization of transportation systems
- Multi-criteria analysis procedure for sustainable mobility evaluation in urban areas
- A two-leveled multi-objective symbiotic evolutionary algorithm for the hub and spoke location problem
- Multi-criteria analysis for evaluating the impacts of intelligent speed adaptation
- The development of Taiwan arterial traffic-adaptive signal control system and its field test: a Taiwan experience
Most Recent Business Publications
Most Popular Business Articles
- 7 tips for effective listening: productive listening does not occur naturally. It requires hard work and practice - Back To Basics - effective listening is a crucial skill for internal auditors
- FAS 109: a primer for non-accountants - Financial Accounting Standards Board's "Statement 109: Accounting for Income Taxes"
- Design a commission plan that drives sales - Sales Commissions
- Too Young to Rent a Car? - 25-years-old the minimum age for car renting - Brief Article
- LIFO vs. FIFO: a return to the basics
