ANTEC 2005 Annual Technical Conference

Plastics Engineering, March, 2005

8:30 AM 101007 Experimental and Numerical Investigation of the Elongational Viscosity Effects in a Coat-hanger Die

Yong Sun Mahesh Gupta Michigan Tech University

9:00 AM 100941 Visualisation and Analysis of Polyolefin Multilayer Coextrusion Flows

Michael Martyn Bradford University

9:30 AM 100943 Influence of Die Design on Interfacial Instabilities in Coextrusion

Martin Zatloukal Tomas Data University in Zlin

10:00 AM 101719 A Description of the Fluoroelastomer Coating Evolution as a Polymer Processing Aid

Mathurin Meillon University of Maryland

10:30 AM 100925 Investigation of Zig-Zag Type of Interfacial Instabilities in Coextrusion

Martin Zatloukal Tomas Bata University in Zlin

M3

Twin-Screw Extrusion I Extrusion

David Bigio, University of Maryland

8:00 AM 101138 Application of Co-Rotating Twin-screw Extruders Based on Torque, Volume and RPM

Werner Wiedmann Coperion Werner & Plfleiderer

8:30 AM 101531 Quantification of Melting using the Pulse Perturbation Technique Part I

Mark Wetzel E. I. du Pont de Nemours and Co., Inc.

9:00 AM 101537 Quantification of Melting using the Pulse Perturbation Technique Part II

9:30 AM 101302 Modeling for Counter-Rotating Twin Screw Extrusion

Krzysztof Wilczynski Warsaw University of Technology

10:00 AM 101353 Melting Phenomena in Polymer Blending

Hongbing Chen University of Alberta

10:30 AM 101548 Study on the Properties of Gear Disk in Co-rotating Twin Screw Extruder*

Xiuqing Ma Mechanical and Electrical Engineering College of Beijing University of Chemical Technology

M4

CAD Simulation, WARP Injection Molding

Jack Dispenza, Lucent Technologies

8:00 AM 102321 Three-dimensional Cooling and Warpage Simulation for the Injection Over-molding Process

Zhiliang Fan Moldflow Pty. Ltd

8:30 AM 102335 Warpage Comparison Between Microcellular and Conventional Injection Molding

Adam Kramschuster Lih-Sheng Turng University of Wisconsin-Madison

9:00 AM 100918 Validation of a Self-regulating Melt Pressure Valve

David Kazmer Vijay Kudchadkar Univ. Mass. Lowell

9:30 AM 100726 Numerical Simulation of Deformations for Injection Molded Parts Shen Chang-Yu Zhengzhou University, China

10:00 AM 101032 Variable Mold Temperature on the Part Qualities of injection Molded Parts

W. R. Jong Y. P. Chang S. C. Chen Chung Yuan University

10:30 AM 101625 Constancy of Properties Resulting from Foam Injection-molding Techniques

Norbert Mueller University of Erlangen-Nuremberg

M5

Assist Injection Molding

Larry Cosma, Kamco Plastics Inc.

8:00 AM 100891 Application of the Similarity Theory For Special Injection Molding Processes

Helmut Potente Martin Schafers University of Paderborn

8:30 AM 102320 Three-dimensional Simulation of Gas-assisted Injection Molding

Shishir Ray Franco Costa Moldflow Pty Ltd

9:00 AM 101197 Effects of Vibrating Injection on Structure and Property of Polymer Produce

Xiangfang Peng South China University of Technology

9:30 AM 101616 The Optimal Parameters of the Water Assisted Injection Molding Process with Abs Material

Kuo-Zoo Liang Ching Yun University

10:00 AM 101020 Optimization of Parts with Rib Using Gas Assisted Injection Molding Technique