Content provided in partnership with

True backyard fun: the UTG airsoft M14

Guns Magazine, June, 2008 by J.I. Galan

The M14 battle rifle occupies an important place among the top military rifles of the past century. With its proven ruggedness, accuracy and long-range punch, the 7.62x51mm M14 became a relatively popular successor to the legendary M1 Garand rifle when it entered service with US armed forces in the late 1950s. From then until its replacement by the M16A1 in the mid-1960s, the M14 earned a respectable reputation as an effective battle rifle.

On the minus side, the M14's potent 7.62 NATO cartridge made the rifle difficult to control on full-auto fire. But on semiauto the M14 sure could deliver its deadly .308" message with great accuracy at impressive distances. Even today, the potent and ponderous M14 is still chosen by our special forces for missions requiring more "bang for the buck".

More Articles of Interest: The "Huh" files; Who needs an assault rifle? Does John?; Handgun ammo prices in perspective: before we tear our hair out over rising...; M1A: a rifle for close spaces or far places; 21st century battle rifle: Springfield Armory's SOCOM-II moves the concept...

Currently, several airsoft gun manufacturers produce nearly exact copies of the famous Ml4, complete with select-fire mechanisms. For this review we chose one manufactured in China by UTG (Under the Gun) Sport. It is Leapers Inc.'s own brand of high-end airsoft guns.

The UTG airsoft M14 from Leapers is an amazingly faithful look-alike of the real thing. As a matter of fact, the UTG M14, weighing a full 8 pounds and at 44-1/2" overall, is about a 1/2-pound lighter and a 1/2" longer than the real M14. This airsoft M14 is superb spittin' image of the M14 and feels almost as solid and rugged as the real boomer.

[ILLUSTRATION OMITTED]

The airsoft UTG M14 is offered in a choice of three stocks made of molded ABS. A wood-finish version most people can't believe isn't real wood, plus an OD green version and an all-black stock. I chose the wood-finish-stock, as it mimics the original military issue better.

Another impressive feature of this "softie" is the receiver, barrel and bolt are actually made of metal with a most realistic-looking Parkerized-like finish. In fact, the bolt can actually be pulled open and released to slam shut, just as in a real M14. Although the moving bolt does not play a part in the operation of this airsoft gun, it is nonetheless a highly realistic feature.

The airsoft UTG M14 employs a battery-powered, spring-piston motor incorporating all-metal gears for smooth and reliable operation. This model comes complete with a 1500 mAh 8.4-volt rechargeable battery in the buttstock. Also included is a battery charger. The battery supplied with this gun requires a charging time of about 3-3/4 hours with the aforementioned charger. Unfortunately, the battery accompanying the gun was a tad too fat to fit easily in its stock compartment, so I had to use one of my smaller 1100 mAh 8.4-volt rechargeable batteries instead. Being about 2/3 the size of the battery that came with the gun, I had no problem installing it. Despite this switch in batteries, the airsoft M14 performed most impressively indeed with the smaller battery. Each full charge of the battery gave close to 1.000 shots before needing a recharge.

[ILLUSTRATIONS OMITTED]

This airsoft M14 is also supplied with two magazines, each with capacity for up to 300 6mm airsoft BBs. Being a high-performance electric softie, only highly polished top-quality plastic BBs weighing .20 gram or heavier should be used. The brass bore liner of this gun has unusually tight tolerances and use of BB s with superior dimensional uniformity and smooth finish is mandatory. The more common--and cheaper--.12 gram BBs can damage the spring-piston , motor by failing to provide sufficient air cushioning, causing the piston to slam against the end of the air chamber. BBs lacking a truly slick surface or reusing BBs--can cause jams and should be avoided. By the way, the magazines supplied with the gun incorporate windup mechanisms for reliable feeding of BBs to the breech.

Firing tests quickly disclosed this airsoft was an impressive performer. The selector catch is located on the right rear section of the receiver, just as in the real M14. Rotated to semiauto, the gun printed groups averaging 2-1/2" to 3" at 15 yards. The tight bore tolerances, coupled with the use of high-quality .20-gram BBs, undoubtedly had a lot to do with the test gun's impressive accuracy.

Switching to full auto I had no difficulty keeping most bursts within a 4" circle at 10 yards. Of course, unlike the real M14, the UTG airsoft copy does not climb off target as the first few rounds are tired. Several empty pop cans were drilled repeatedly with bursts from this softie. On full auto, the UTG M14 delivers a cyclic rate of fire hovering around 800 rounds per minute. In contrast, the real deal's cyclic rate runs about 750 rpm. Incidentally, the UTG M14 produced muzzle velocities averaging 325 fps with .20-gram BBs.

[ILLUSTRATION OMITTED]

The sample was also accompanied by a rather flimsy looking web sling, Allen keys, barrel cleaning rod, and a metal scope base. The latter can be attached to the left side of the receiver via two large knurled bolts. Even with the mount attached it is still possible to use the standard sights. A short weaver rail comes already installed on the bottom front of the forearm. This rail is intended primarily for mounting a bipod.

True backyard fun: the UTG airsoft M14

Guns Magazine, June, 2008 by J.I. Galan

Find Research Guides for:

Find Featured Titles for: Health

Most Popular Articles in Sports

Most Popular Publications in Sports