AR-15/M-16 armorer's wrench

Guns Magazine, June, 2008

From GUNTEC USA

This wrench combines many of the functions necessary for anyone building or repairing an AR-15. It is a two-sided implement. At one end, it attaches either multi-point or peg style barrel nuts on barrels up to in diameter, and a torque wrench can fitted into the 1/2" square slot opening. This end also aids I the installation of free-floating handguards. The other end fits CAR/M-4 stock locking nuts, and a large flathead screwdriver blade is included for use on full-size A2 buttstock screws. The other two slots on the wrench fit A1 & A2 birdcage flashhiders and receiver extensions. Strength and durability are the result of heat-treated steel construction with a Parkerized finish. Contact: GUNTEC USA, P.O. Box 12731, Scottsdale, AZ 85267, (480) 518-5359, Fax: (480) 451-1245, www. Tacticalaccessories.com, E-Mail: guntecusa@hotmail.com.

[ILLUSTRATION OMITTED]