Be slick—study the oil patterns - Bowling Clinic

Bowling Digest, June, 2003 by Bill Spigner

* I have been struggling in my league ever since the house I bowl in put down synthetic lanes. Can you give me some help on how to find the line on synthetic lanes? I bowl with the Columbia Messenger Titanium and have been playing the second arrow. I use a Storm spare ball for spares. Is the basic premise the same--move in the direction you are missing--or do synthetic lanes change that?

Yes, the basic premise for adjustments is to move in the direction of the miss, regardless of the surface. But how you move is the key to making a functional adjustment.

You play the second arrow, but playing the second arrow is only good if that is the correct place to play. Bowlers are almost always taught to play the second arrow when they are first introduced to spot bowling and begin learning how to hook the ball.

Most bowling centers will oil the lanes so this area is the best place to start on a freshly oiled lane. They apply a lot of oil from the second arrow on the right to the second arrow on the left. There's very little oil on the first 10 boards on both sides of the lane.

This lane condition is called a 10 to 10 block, or Top Hat, because it looks like a top hat on a lane-condition graph. Rolling a ball straight, with very little hand action, will allow a bowler to play straight down the lane around the second arrow (the l0-board). With this type of release and lane condition, bowlers can play in this area merely by moving their feet left or right to accommodate the ball reaction.

If the ball doesn't hook enough, move your feet a couple of boards to the right. If the ball is hooking too much, move a little to the left, keeping the target the same. Just keep in mind that this type of adjustment isn't foolproof--not all oiling patterns can be played the same.

With the high-performance oiling machines of today, a proprietor can oil the lanes easily with many different patterns. However, no matter which oil pattern is set down, there's always a wat to solve it.

Let's take a look at how to attack a basic oil pattern. If a machine has pads only five boards wide, the lanes will always have more oil in the center of the lane than on the edge. So the basic rule of thumb, moving in the direction the ball misses, is correct on almost all lane conditions when you are rolling on a freshly stripped and oiled lane.

The beginning adjustment that should be made every time to help you find the fight place to play on the lane is to move your feet and target, not just your feet.

There are basically two different types of lane machines made today. One is called a pad machine. This machine applies the oil to the lane using three-, five-, and seven-board width pads.

The machine is programmed so the pads oil a specific length before they stop. When the machine first starts to oil just beyond the foul line, all the pads are saturated with oil and the oil is transferred from the pads to a brush that applies the oil to the lane.

In pattern A above, the pad that oils boards 1 through 7 applies oil for seven feet, the three-board pad (oiling the 7 through 10 board) for 14 feet, the five-board pad for 24 feet, and the 15- to 20board pad for 30 feet.

[ILLUSTRATION OMITTED]

This type of oiling pattern demands that a bowler consider a few different angles of attack on a freshly oiled lane. The very straight player can play to the right around the 5- to 7-boards, pointing the ball up top to the pocket. The player with low revs but a little more side roll on the ball can play between the 8- and 10-boards. The player with a medium strength ball roll can play around the 10- to 12-board, and the player with the big hand can play the 3rd arrow. Overall, the dominant shot at the start of the night on an oil pattern like this would be around the 10board.

With the pad machine that uses only five-board width pads, the shot will be a little different. In pattern B, boards 1 through 5 are oiled for seven feet, boards 5 through 10 for 14 feet, boards 10 through 15 for 21 feet, and boards 15 through 20 for eight feet.

[ILLUSTRATION OMITTED]

This type of pattern would be referred as a Christmas Tree. It's a little easier to attack because it allows a greater number of bowlers to play the part of the lane that their hook allows, in an area they are comfortable playing. This multi-angle pattern allows you to play off the oil line on boards 5, 10, and 15.

The typical condition put out today is oiled like pattern C, gutter-to-gutter oil for about five feet and 10 to 10 oil for about 25 feet. This straightforward condition was the one mentioned earlier, the 10 to 10 block (or Top Hat).

[ILLUSTRATION OMITTED]

The other type and the newest technology in lane machines is a wickless (no pads) machine that can apply the oil to the lane one board at a time across the width of the lane. Unlike the pad machines that can only apply oil based on the width of the pad, this type of machine gives proprietors much more flexibility with their oiling procedures.

The wickless machine is now used exclusively on the PBA tour. You can go to pba.com and access the five primary patterns that are used on the tour, with an explanation of the scoring potentials of each of the patterns and the best way to play them.