Flashing performs two duties
Masonry Construction, Sept, 2003
Jamflash semi-rigid flashing developed for use as a primary waterproofing barrier and air dam at the jambs and heads of openings in exterior cavity wall is fabricated from water-resistant polypropylene (a thermoplastic elastomer system). This material makes the flashing highly resistant to degradation under exposure to harsh weather conditions and UV rays. Compatible with silicone and polyurethane sealants, it is easily trimmed to size (the standard tension leg width is 7 inches) and provides greater longevity than exterior-grade sealants. It installs easily, is less costly and more durable than a secondary sealant joint, and does not rip, tear, or get lodged in the cavity during construction.
* Lennel Specialties Corp., 781-344-9794, www.lennelspecco.com
circle 18 on the reader service card
Most Recent Business Articles
- Multiple criteria evaluation and optimization of transportation systems
- Multi-criteria analysis procedure for sustainable mobility evaluation in urban areas
- A two-leveled multi-objective symbiotic evolutionary algorithm for the hub and spoke location problem
- Multi-criteria analysis for evaluating the impacts of intelligent speed adaptation
- The development of Taiwan arterial traffic-adaptive signal control system and its field test: a Taiwan experience
Most Recent Business Publications
Most Popular Business Articles
- 7 tips for effective listening: productive listening does not occur naturally. It requires hard work and practice - Back To Basics - effective listening is a crucial skill for internal auditors
- FAS 109: a primer for non-accountants - Financial Accounting Standards Board's "Statement 109: Accounting for Income Taxes"
- LIFO vs. FIFO: a return to the basics
- Design a commission plan that drives sales - Sales Commissions
- Too Young to Rent a Car? - 25-years-old the minimum age for car renting - Brief Article
Most Popular Business Publications
Content provided in partnership with
