Project: driftwood rack

Turn a scavenged piece of driftwood into an organic-chic entryway rack in 30 minutes or less. (For regulations on collecting driftwood, check with your local state beach authority.)

[ILLUSTRATION OMITTED]

1. Our piece of driftwood happened to lie flat against the wall; if yours doesn't, use a band saw to cut off one-third of the driftwood lengthwise.

2. With four round hook screws (available at home improvement stores) and a handheld electric drill, drill four holes into the bottom of your driftwood, angling them forward slightly so the hooks won't lean against the wall. Use a drill bit the width of your screw's shank.

3. With the help of a wrench, screw the hook ends into the wood, tightening them so they all face forward.

4. Secure your driftwood to a wall using two long screws, spaced so each is secured in a wall stud.

COPYRIGHT 2006 Sunset Publishing Corp.
COPYRIGHT 2008 Gale, Cengage Learning