What's up with holiday lights? Here's the 1991 news - Christmas lights

Sunset, Dec, 1991

A THOUSAND POINTS of light punctuate many an outdoor holiday display, but getting those lights up easily and without defacing your house with staples or nails can be a trick.

Our pictures show you some temporary, reusable, and permanent hardware you'll find where you buy light strings. Most of these helpers cost between $2 and $5 a dozen. We also give you the latest word on lights and how to use them safely.

Lights fall into two groups: Standard sets (with screw-in bulbs) and miniature sets (with small push-in bulbs).

THE OLD STANDARDS:

SCREW-IN BULBS

These sets are made like regular lamp cords, with two parallel wires. Each string has a regular two-prong polarized plug at one end, 15 or 25 C-7 or C-9 lights, and a receptacle plug at the other end so another set can be added in line. Lamps on standard sets operate independently; if one is removed, all the others will continue to burn.

If a set is labeled indoor-outdoor, it likely uses C-7 bulbs. It's called indoor-outdoor because the bulbs generally burn cool enough for indoor use, though not necessarily to touch.

C-7 bulbs each use 5 to 10 watts, depending on the manufacturer. The larger, brighter C-9 bulbs use 7 to 10 watts each and are recommended just for outdoors, though they also meet UL's indoor-outdoor rating.

If you buy lights new, follow manufacturer's recommendations for number of strings that can be connected. For older sets, use a maximum of 75 C-7 bulbs if you know that all the bulbs are 5 watts. But wattage can vary greatly; if you don't know your bulbs' wattage, figure 50 bulbs maximum on any one line. Always figure 50 bulbs maximum for a line of c-9s.

Overloading the wires will at the least blow the string's fuse. If old sets (pre-1982) have no fuses, overloading could cause a fire. Check to see whether your strings have replaceable fuses; they're either built into the plug or into an in-line holder.

Standard strings usually are lit continuously, but you can use random twinkling replacement bulbs with both C-7s and C-9s (you can also buy new sets with all twinkling bulbs). You need only replace a third to half of the bulbs on a string to get the twinkling effect.

MINIATURE LIGHTS:

LOTS OF OPTIONS

The small-bulb midget sets can range from 10 to 160 bulbs. They're made with two to five wires, depending on what the lights can do.

Strings with few lamps use 6- or 12-volt bulbs; the bulbs are slightly larger than the 2.5- to 3.5-volt bulbs used in longer strings.

Some or all of the bulbs in midget sets are connected. This means that if one lamp is removed, some or all the lamps will go out. If any bulbs are loose or missing, the midget set won't light.

Each bulb has a shunt, so that if the bulb burns out the set keeps working, but only if all the bulbs are tight in their sockets. Replace burned-out bulbs as soon as you can, because remaining bulbs absorb the voltage previously consumed by a burned-out midget bulb, shortening bulb life.

Midget sets have an add-on plug so another set can be connected at the front of the string; some have a receptacle plug at the other end for stringing in line. Some sets are circular, which can make stringing nearly impossible; check before you buy. Battery-operated sets let you decorate without worrying about running an extension cord; these are generally for indoor use only, depending on the battery enclosure.

All midget sets are cool enough for indoor use. Unless they have some decorative feature (such as paint or glitter) that is inappropriate for outdoor use, they can be used outdoors as well.

Compared with standards, midgets generally have more lights per string, making more effects possible. Because more than 200 bulbs can be on one circuit, you can also string more sets together.

Nearly all midget sets come with one or more red-tipped flasher bulbs as spare bulbs. By placing a flasher bulb into the first socket in the midget string, all the other bulbs in that part of the string will flash together. The instructions on the package will tell you whether more than one flasher bulb is needed for that particular set.

Another type of midget set is random twinkle. In this set, half the bulbs are special lamps that twinkle independently; the other half are ballast lamps that protect the string and burn continuously.

Electronic sets have several circuits and a control that can cause the lamps in each circuit to flash or change brightness (fade in and out). Some flashing sets are called chasers because the lamps are arranged in line and appear to move, or chase each other. The control lets the user adjust the flashing speed. Other sets have a control that lets the user select not only the speed but also whether the lights flash, fade, or burn continuously.

Most midget sets have non-replaceable fuses built into the plug.

NEW CONFIGURATIONS,

BULB COVERS

Midget lights usually are arranged in a straight line on a string. The string is stretched or coiled over the area to be decorated. A new electronically controlled set runs 16 branches of 10 lights each evenly spaced off a 7-foot main line. It's useful for rectangular areas like windows and railings, as well as trees and bushes.