Biomedical devices drive machining processes to new lows: ultraviolet laser machining technology helps this shop stay on top of shrinking feature and hole sizes common to the latest biomedical components

Modern Machine Shop, June, 2005 by Derek Korn

The definition of "medical machining" may lack pinpoint precision, but the broad-brush manufacturing sector does offer opportunities for machine shops beyond the production of implant devices and bone screws. Biotechnology is one example--and it is an industry segment that is burgeoning. In many cases, though, the exotic materials and micron-level features common to the latest biomedical devices present machining challenges that physical milling and drilling often cannot surmount. One non-traditional machining process that has proven effective and repeatable--and in some cases the only means to machine select biomedical parts--is ultraviolet (UV) laser machining.

Such low-power, short-wavelength laser systems are commonly used by medical OEMs and laser contract shops to produce tricky biomedical components. According to Bill Kallgren, sales manager for J.P. Sercel Associates (JPSA), these laser systems have yet to find a home in what might be considered a "typical" medical contract machine shop, occupying floor space alongside Swiss-type lathes, machining centers or grinding machines. Often the reason for this isn't because those shops lack the cleanliness or environmental control capability (clean room conditions are often required for biomedical processing requirements, not for UV laser machining), but rather it is because of the lack of knowledge in the metalworking community about this particular laser machining process. Those in metalworking circles are more likely to be familiar with high-power C[O.sub.2] or YAG laser systems used for cutting thin or thick metal sheet.

JPSA, located in Hollis, New Hampshire, specializes in laser machining systems that use pulsating zaps of UV laser light to machine small features in materials such as glass, silicon nitride, quartz, polymers, ceramics and sapphire. Not only does the company design and build laser systems, but its R&D applications department, which currently has 13 UV laser systems, doubles as a contract shop. That shop serves a variety of customers in the medical, electronic and semiconductor fields.

No doubt there are enterprising medical contract shops looking for a way to expand their capabilities and customer base, and UV laser machining may be the vehicle to merge into the biomedical market. Shedding light on this technology and how it is applied at JPSA's shop is valuable to those shops and other manufacturers that may be considering alternative machining methods.

New Devices, New Challenges

Biomedical devices often function at the cellular level, meaning that their components' holes, channels and other features may be minuscule. The range of hole diameters that JPSA machines is typically between 1 micron and a couple hundred microns. Not surprisingly, hole diameters and relative feature position tolerances are also in the micron range. Though the material thickness often can be no more than 2 mm, hole aspect ratios (ratio of hole length to diameter) are often quite high.

Heat generated during a machining process is the enemy of biomedical materials, most notably those made of polymers and Teflons. That is one of the reasons why physical milling won't cut it for these materials. Because the materials are susceptible to discoloration, melting and burning, any machining operation must not deliver a great deal of heat into the part. UV laser machining is virtually a heat-free process, so material damage likely won't occur.

Laser Types

UV lasers remove material by a process called photo ablation. Successive, high-repetition laser pulses remove tiny, controlled amounts of material. The small amount of ablated material evaporates as a plume of plasma. Depending on the material being processed, toxic gases may be generated which would require an efficient gas collection and scrubber system, such as activated charcoal canisters.

JPSA uses two types of UV laser systems--excimer and diode pumped solid state (DPSS). In simplest terms, the difference between these two lasers boils down to beam diameter (or laser spot size). An excimer laser will produce a larger spot size than a DPSS. While an excimer laser's relatively large beam diameter might seem inappropriate for very small holes and features, this laser spot size can be shaped with a mask, allowing only select portions of the beam to impact the part surface (using laser-speak, this process is called near-field imaging). The mask is shaped per the feature to be machined, and multiple features can be machined at one time. In terms of hole making, this simultaneous processing of multiple holes ensures very accurate hole-to-hole positioning. JPSA makes its own masks from molybdenum for short-run jobs or prototypes. For high-volume jobs in which the mask will experience extended use, a more durable, though more expensive, chrome-on-quartz mask will be used.

Excimer lasers are very effective in producing blind holes. Thanks to a very high pulse-to-pulse stability, excimer lasers can create blind holes or micro-channels to depths and widths accurate to [+ or -] 3 microns (sub-micron accuracies are possible in some cases). This accurate depth control also enables excimer lasers to produce holes and oval shapes in only one side of a needle, for example. The depth control will allow the laser to cut the hole in one needle sidewall without damaging the metal oil the opposing sidewall. It also allows selective material removal, such as stripping a section of plastic from a coated catheter without harming the metal underneath.