Shop Equipment Showcase

Electrical Apparatus, Jul 2004

"Shop Equipment Showcase" is a feature published periodically in Electrical Apparatus to highlight tools and equipment used in electromechanical service. Inclusion of products in this feature does not constitute endorsement by Electrical Apparatus, nor can we verify product claims.

Adjustable cabinet lieight suits different users

The Model 8-AH ergonomic blast cabinet is available with either suction-blast or direct-pressure media delivery. Height adjustment is variable to suit multiple operators. Made of welded steel, the base provides forklift channels for relocation. Finishing chamber 36'' high by 42'' wide and deep has two full-width front doors, the top one hinged upward and the bottom one hinged to the left side. Extra-large armholes have built-in padded arm rests. Optional Lazy Susan turntable holds 500 lbs. To learn more, contact Guyson Corp., W.J. Grande Industrial Park, 13 Grande Blvd., Saratoga Springs, N.Y. 12866; (800) 633-6677.

Adding crane lifts to small trucks

Crane-equipped truck bodies in the KM, EM, and EMGC series are described in a four-page brochure from H&H Sales Co., 16339 Lima Rd., P.O. Box 686, Huntertown, Ind. 46748-0686; (800) 551-9341. Several models, in three sizes, fit any 1- or 1 ½-ton truck chassis, with maximum capacity of 38,000 lb-ft. All bodies meet FMVSS 108 and ICC vehicle lighting standards. Literature also describes truck body accessories such as utility cabinets and side railings.

A special section devoted to equipment and materials used in apparatus service

Positioner allows workers easy access to parts

The Model LTN1 electro-hydraulic work positioner is designed to place assembly components within economically accessible reach of the operator. As the LTN1 tilts, it also moves away from the operator to avoid intrusion into the work area. Available in capacities of 2,500, 4,000, and 6,000 lbs., with standard platform sizes up to 4'' × 5'' (tilting capability up to 45°) with 12'' high backstop. Self-contained power unit has lubricated-for-life TENV motor. More details are available from Pentalift Equipment Corp., P.O.. Box 1510, Buffalo N.Y. 14240; (519) 763-3625.

Wire strippers have adjustable heat, controls

Hand-held thermal wire strippers with adjustable heat controls are offered by The Eraser Co., Oliva Dr., Syracuse, N.Y. 13221 ; (800) 724-0594. Type HTS1 strips wires from 43 AWG up to ½'' O.D. HTS2 covers the range from 43 to 18 AWG. Heating element temperature can be set up to 1,100°F. 5/04

Flexible fan mounting suits hot work

The 4-In-1 Mancooler direct-drive cooling fan, in either 30'' or 36'' sizes, features four mounting options in one package: chain hanging mount, ceiling or wall mount, and portable barrel with wheels. Single-phase, totally enclosed air-over 115 V drive motor is either three-speed (30'' fan) or two-speed (36''). Fans supply cfm range from 3410 to 11,200. Request more information from Airmaster Fan Co., 1300 Falahee Rd., P.O. Box 968, Jackson, Mich. 492044)962; (517) 764-2300.

Compressed air system for pneumatic tools

The Sky Air accessory system provides up to 9.3 cubic feet per minute of air at 125 psi, for operation of ½'' drive impact wrenches, air hammers, drills, or other tools from a mobile aerial lift work platform. The compressor-fitting under the hood of a JLG boomlift-is driven by the JLG 7,500 watt SkyPower generator. The air line is integrated into the powertrack. Air is also usable to operate the JLG SkyCutter accessory system. For more information, contact JLG Industries, Inc., 13224 Fountainhead Plaza, Hagerstown, Md. 21742-2678; (240) 420-8706.

Laser alignment tool features larger target

The LineLazer shaft alignment kit and software uses horizontally spread beam directed towards 35 mm target, needing no adjustment screws to stay cm-target even when misalignment is severe. Measurement is fully automatic in less than one half-turn of the shaft. Unit is configured for horizontal and vertical alignment, measures soft foot, and includes thermal compensation. For more details, contact SPM Instrument, Inc., 359 N. Main St., P.O. Box 89, Marlborough, Conn. 06447; (860) 295-8241.

Weather-resistant power source for outdoors

The Invertec V275-S inverter welding power source, for stick or TIG use, meets the IP23S environmental exposure rating and provides up to 275 amps from any input voltage 208 to 575, single- or three-phase. Unit allows arc gouging with up to 3/16'' carbon electrodes. Selectable hot start accommodates thick, rusty, or dirty materials, while Touch-Start capability permits starting TIG welding arc without high frequency. For further information, contact Lincoln Electric Co., 22801 St. Clair Ave., Cleveland, Ohio 44117-1199; (888) 355-3213.

Saddle boxes suit compact pickups

The Weather Guard aluminum deep-saddle boxes with notched bottom design are designed for side-rail suspension in popular compact pickup trucks with short beds and wheel wells located in the front of the bed. Boxes are available in diamond-plate aluminum with either clear or black powder coat finish, with storage capacity of 8.9 cubic feet. Single-cover style conceals full-length aluminum piano hinge. One-touch latch system allows one-handed opening (aided by dual gas springs) from either side of truck. For further details, contact Knaack Mfg. Co., 420 E. Terra Cotta Ave., Crystal Lake, Ill. 60014; (800) 456-7865. 5/04