ACI Materials Journal

View more issues:

Articles in Nov/Dec 2007 issue of ACI Materials Journal

• On-Site Measurements on Corrosion Rate of Steel in Reinforced Concrete
  by So, Hyoung Seok; Millard, Stephen Geoffrey
• Response of Concrete to Dynamic Elevated-Amplitude Cyclic Tension
  by Lin, Gao; Yan, Dongming; Yuan, Ying
• Influence of Environmental Exposure Conditions on Mechanical Properties of High-Strength Concrete
  by Trejo, David; Moutassem, Fayez; Hueste, Mary Beth D; Halmen, Ceki; Cline, Daren B H
• Measuring Chloride Concentrations for Various Cement-Based Materials Systems
  by Halmen, Ceki; Trejo, David
• Strength Optimization of Novel Binder Containing Plasterboard Gypsum Waste
  by Pouya, Homayoon Sadeghi; Ganjian, Eshmeiel; Claisse, Peter; Karami, Seema
• Experimental Testing to Determine Concrete Fracture Energy Using Simple Laboratory Test Setup
  by Martin, Joshua; Stanton, John; Mitra, Nilanjan; Lowes, Laura N
• Sodium Sulfate Resistance of Fast-Track Portland-Cement Concretes
  by Ghafoori, Nader; Diawara, Hamidou; Beasley, Shane
• Models for Corrosion-Induced Bond Strength Degradation in Reinforced Concrete
  by Bhargava, Kapilesh; Ghosh, A K; Mori, Yasuhiro; Ramanujam, S
• Transport Properties of Engineered Cementitious Composites under Chloride Exposure
  by Sahmaran, Mustafa; Li, Mo; Li, Victor C
• Role of Steel and Cement Type on Chloride-Induced Corrosion in Concrete
  by Pradhan, Bulu; Bhattacharjee, B
• Use of High Volumes of Fly Ash to Improve ECC Mechanical Properties and Material Greenness
  by Yang, En-Hua; Yang, Yingzi; Li, Victor C
• Use of Alternative Materials to Reduce Shrinkage Cracking in Bridge Decks
  by Brown, Michael D; Smith, Cuyler A; Sellers, J Greg; Folliard, Kevin J; Breen, John E